How to Connect a TP-Link Access Point to a Router Wirelessly
In today’s digital age, a reliable and stable Wi-Fi network is essential for both personal and professional use. If you have a TP-Link router but need to extend its coverage, connecting a TP-Link access point can be a great solution. This article will guide you through the process of how to connect a TP-Link access point to a router wirelessly, ensuring seamless connectivity throughout your home or office.
Before You Begin
Before you start the wireless connection process, make sure you have the following:
1. A TP-Link access point
2. A TP-Link router
3. An Ethernet cable
4. A computer or laptop with internet access
Step 1: Set Up the TP-Link Access Point
1. Connect the TP-Link access point to your router using an Ethernet cable.
2. Power on the access point and wait for it to boot up.
3. Connect your computer to the access point using Wi-Fi or an Ethernet cable.
Step 2: Access the TP-Link Access Point’s Web Interface
1. Open a web browser on your computer.
2. Enter the default IP address of the TP-Link access point in the address bar. The default IP address is usually 192.168.0.254.
3. Log in to the access point’s web interface using the default username and password. The default username is admin, and the default password is admin.
Step 3: Configure the TP-Link Access Point
1. Once logged in, navigate to the “Wireless” tab.
2. Under the “Basic Settings” section, enter the SSID (network name) and select the wireless channel you want to use.
3. In the “Security” section, choose the security type you prefer (e.g., WPA2-PSK). Set a strong password to secure your network.
4. Click “Save” to apply the changes.
Step 4: Connect the TP-Link Access Point to the Router Wirelessly
1. In the TP-Link access point’s web interface, navigate to the “Wireless” tab.
2. Click on the “WPS” button and select “Router.”
3. Wait for a few seconds as the access point connects to the router.
4. Once the connection is established, you will see a message indicating that the access point is successfully connected to the router.
Step 5: Verify the Connection
1. Disconnect your computer from the access point’s Wi-Fi network.
2. Connect to the router’s Wi-Fi network using the SSID and password you set in Step 3.
3. Test the internet connection on your computer to ensure that the TP-Link access point is working correctly.
Congratulations! You have successfully connected your TP-Link access point to the router wirelessly. Now, enjoy a wider and more stable Wi-Fi network throughout your home or office.
