How to Empty Clean Water from Rug Doctor: A Step-by-Step Guide
If you’ve ever used a Rug Doctor to clean your carpets, you know that it’s a powerful tool for removing dirt and stains. However, once the cleaning process is complete, it’s essential to empty the clean water from the machine to prevent any damage or unpleasant odors. In this article, we’ll provide you with a step-by-step guide on how to empty clean water from your Rug Doctor effectively and safely.
Step 1: Turn Off the Machine
Before you start the process of emptying the clean water from your Rug Doctor, it’s crucial to turn off the machine. This will prevent any accidental spills or leaks during the process. Make sure the machine is unplugged from the power source and that it is turned off.
Step 2: Locate the Emptying Port
Rug Doctor machines typically have an easy-to-find emptying port, which is usually located on the side or back of the machine. Look for a lever or button that can be pressed to release the water. If you’re not sure where the emptying port is, consult the user manual for your specific model.
Step 3: Open the Emptying Port
Press the lever or button to open the emptying port. Once it’s open, you should see a clear tube or hose leading from the port to the water tank. This is where the clean water will be released.
Step 4: Empty the Water Tank
Place a bucket or container under the emptying port to catch the water. Gently press the lever or button to release the clean water from the Rug Doctor. The water should flow out of the machine and into the container below.
Step 5: Check for Any Remaining Water
After the clean water has been emptied, it’s essential to check for any remaining water in the machine. Open the water tank and inspect the inside for any residual water. If there is still water present, use a sponge or cloth to soak it up. Be sure to wring out the sponge or cloth to remove as much water as possible.
Step 6: Clean the Emptying Port
After you’ve emptied the clean water from the Rug Doctor, it’s a good idea to clean the emptying port. Use a damp cloth to wipe away any dirt or residue that may have accumulated. This will help maintain the proper functioning of the port and prevent any clogs in the future.
Step 7: Store the Rug Doctor Properly
Once you’ve emptied the clean water and cleaned the machine, it’s time to store it properly. Place the Rug Doctor in a dry, cool place to prevent any mold or mildew growth. If possible, store the machine with the water tank removed to further protect it from moisture.
By following these simple steps, you can ensure that your Rug Doctor is always in top condition and ready for the next cleaning job. Emptying the clean water from your Rug Doctor is an essential part of maintaining the machine and keeping your carpets clean and fresh.
