How to Empty Water from a Steam Iron: A Step-by-Step Guide
Using a steam iron is a convenient and effective way to remove wrinkles from your clothes. However, after using it, it is important to empty the water from the iron to prevent any potential damage or build-up of limescale. In this article, we will provide you with a step-by-step guide on how to empty water from a steam iron.
Step 1: Turn Off the Iron
Before you start the process of emptying the water from your steam iron, make sure to turn it off and unplug it from the power source. This will ensure your safety and prevent any accidents.
Step 2: Open the Water Reservoir
Most steam irons have a water reservoir that can be accessed by lifting a lid or removing a panel. Locate the reservoir and gently lift or remove it to expose the water tank.
Step 3: Empty the Water
Once the reservoir is open, tilt it slightly to drain the water out. Be careful not to spill any water on the iron or nearby surfaces. If the water does not drain easily, you can gently tap the reservoir against a sink or other hard surface to help it flow out.
Step 4: Clean the Reservoir
After emptying the water, take a soft cloth or sponge and wipe down the inside of the reservoir to remove any remaining water or debris. This will help prevent limescale build-up and keep your iron in good condition.
Step 5: Close the Reservoir
Once the reservoir is clean and dry, make sure to close it securely. This will prevent any dust or debris from getting inside and ensure that the iron operates properly.
Step 6: Clean the Iron
While you are emptying the water from your steam iron, it is also a good idea to clean the iron itself. Use a damp cloth to wipe down the exterior and a soft brush to remove any lint or fluff from the steam holes. This will help improve the iron’s performance and extend its lifespan.
Step 7: Re-fill the Reservoir
After cleaning the iron, you can re-fill the water reservoir with fresh water before using it again. Be sure to use distilled water or water treated with a water softener to prevent limescale build-up.
By following these simple steps, you can easily empty water from your steam iron and keep it in top condition. Regular maintenance will ensure that your iron continues to provide effective and safe use for years to come.
