How to Open Up a Purell Hand Sanitizer Dispenser
In today’s fast-paced world, maintaining hygiene is more important than ever. One of the most common tools used for hand sanitization is the Purell hand sanitizer dispenser. However, sometimes you may find yourself in a situation where you need to open up the dispenser for various reasons, such as refilling or cleaning. In this article, we will guide you through the process of how to open up a Purell hand sanitizer dispenser.
Step 1: Locate the Lock Mechanism
The first step in opening a Purell hand sanitizer dispenser is to locate the lock mechanism. Most Purell dispensers have a simple lock mechanism that can be found on the top or side of the dispenser. Look for a small lever or button that may be labeled “lock” or “unlock.”
Step 2: Unlock the Dispenser
Once you have located the lock mechanism, press or pull the lever or button to unlock the dispenser. You may hear a click or feel a release, indicating that the lock has been disengaged. Be sure to check that the lock is fully unlocked before proceeding to the next step.
Step 3: Remove the Cap
With the lock mechanism unlocked, the next step is to remove the cap of the dispenser. Depending on the model, the cap may be attached with a screw or simply snap off. If it is attached with a screw, use a flathead screwdriver to carefully remove the screw. If it is a snap-on cap, gently twist it counterclockwise to release it.
Step 4: Access the Refill Container
With the cap removed, you will now have access to the refill container inside the dispenser. Most Purell dispensers have a removable cartridge that holds the hand sanitizer. Locate the cartridge and gently pull it out of the dispenser. Be sure to support the cartridge to avoid spilling any remaining sanitizer.
Step 5: Refill or Clean the Dispenser
Once you have access to the refill container, you can either refill the dispenser with new hand sanitizer or clean it as needed. If you are refilling, simply place the new cartridge into the dispenser and replace the cap. If you are cleaning, you can use a damp cloth to wipe down the inside of the dispenser and the outside to remove any dirt or grime.
Step 6: Reassemble the Dispenser
After you have refilled or cleaned the dispenser, it’s time to reassemble it. Place the refill container back into the dispenser and replace the cap. If the cap was attached with a screw, make sure to tighten it securely. Finally, engage the lock mechanism to ensure that the dispenser remains secure.
By following these simple steps, you can easily open up a Purell hand sanitizer dispenser for refilling or cleaning. Remember to always handle the dispenser with care to avoid any spills or accidents. Keeping your hands clean and healthy is essential, and having a well-maintained Purell dispenser is a crucial part of that process.
