How to Program DirecTV Remote RC73 to Receiver
Programming your DirecTV remote RC73 to work with your receiver is a straightforward process that ensures you can easily control your DirecTV system. Whether you’re setting up a new remote or need to reprogram the existing one, following these simple steps will help you get everything up and running in no time.
Step 1: Power on Your DirecTV Receiver
Before you begin programming the remote, make sure your DirecTV receiver is powered on. You can do this by pressing the “Power” button on the receiver itself or by using the “Power” button on the remote that came with your receiver.
Step 2: Locate the Programming Code
The DirecTV remote RC73 requires a programming code to work with your specific receiver model. You can find this code in the DirecTV remote code list, which is typically included in the remote’s user manual or available online. Make sure you have the correct code for your receiver model.
Step 3: Enter the Programming Code
Press and hold the “Setup” button on the remote for a few seconds until the indicator light on the remote blinks twice. This indicates that the remote is in programming mode.
Next, press the “Mute” button on the remote. The indicator light will blink twice again, confirming that the remote is ready to receive the programming code.
Now, enter the programming code for your receiver model by pressing the corresponding number buttons on the remote. For example, if the code is “1234,” press the “1,” “2,” “3,” and “4” buttons in sequence.
After entering the code, press the “Power” button on the remote. If the receiver powers off, it means the programming was successful. If not, repeat the process with a different programming code until you find the correct one.
Step 4: Test the Remote
Once you have entered the correct programming code, test the remote by pressing various buttons, such as “Channel Up,” “Channel Down,” “Volume Up,” and “Volume Down.” If the receiver responds accordingly, the remote is programmed correctly.
Step 5: Save the Settings
In most cases, the remote will save the programming code automatically after a successful setup. However, if you want to be extra cautious, you can press the “Setup” button again to exit programming mode.
Congratulations! You have successfully programmed your DirecTV remote RC73 to work with your receiver. Now you can enjoy easy and convenient control of your DirecTV system.
