How to Make a Pocket Pillow Case
Creating a pocket pillow case is a delightful way to add a personal touch to your home decor or as a thoughtful gift for someone special. Not only does it provide a cozy spot for a pillow, but the pocket also offers a convenient place to store small items like a phone, keys, or a remote control. In this article, we will guide you through the process of making a pocket pillow case, from gathering the necessary materials to completing the final touches.
Materials Needed
Before you begin, make sure you have the following materials on hand:
– Fabric: Choose a fabric that is comfortable and matches your decor. You will need enough fabric to cut out two pieces for the pillow case and two pieces for the pocket.
– Thread: Select a thread that complements your fabric.
– Scissors: A pair of sharp scissors for cutting the fabric.
– Ruler: A ruler to measure and cut the fabric accurately.
– Pins: Pins to hold the fabric in place while sewing.
– Sewing machine: If you have one, a sewing machine can make the process quicker and more precise.
– Iron: An iron to press the fabric and seams.
– Measuring tape: To measure the dimensions of the pillow case and pocket.
Step-by-Step Instructions
1. Measure and Cut the Fabric: Start by measuring the dimensions of your pillow. Add an extra inch to both the length and width to account for seams. Cut two pieces of fabric to these dimensions for the pillow case.
2. Create the Pocket: Cut two pieces of fabric for the pocket. The dimensions should be slightly smaller than the pillow case, with a length that allows it to fit inside the pillow case. For example, if your pillow case is 16 inches by 12 inches, the pocket pieces could be 14 inches by 10 inches.
3. Fold and Press the Pocket: Fold the pocket pieces in half lengthwise with the right sides facing in. Press the fold with an iron to create a crease. Open the pocket pieces and fold the raw edges towards the center crease, pressing again.
4. Attach the Pocket to the Pillow Case: Place one of the pocket pieces on the right side of one of the pillow case pieces, aligning the edges. Pin the pocket in place, leaving a small opening for turning. Repeat this step with the second pocket piece and the second pillow case piece.
5. Sew the Pocket and Pillow Case: Using a sewing machine or a needle and thread, sew around the pocket, leaving the opening for turning. Repeat this step for the second pocket. Then, sew around the edges of the pillow case, leaving a small opening for turning.
6. Turn and Press: Turn the pillow case and pocket right side out through the opening. Press the seams flat with an iron. Topstitch around the edges of the pillow case and pocket to give it a polished look.
7. Close the Opening: Finally, close the opening in the pillow case and pocket by hand-stitching or using a sewing machine.
Congratulations! You have successfully made a pocket pillow case. Now you can enjoy its cozy comfort and convenient pocket. Customize it with decorative buttons, ribbons, or even embroidery to make it uniquely yours.
