How to Replace Cabin Air Filter in a 2015 Ford Explorer
Replacing the cabin air filter in your 2015 Ford Explorer is a task that can be easily accomplished by the average car owner. This filter is responsible for improving the air quality inside your vehicle by removing pollen, dust, and other allergens from the air you breathe. Over time, the filter can become clogged, reducing its effectiveness and potentially causing respiratory issues for passengers. In this article, we will guide you through the process of replacing the cabin air filter in your 2015 Ford Explorer.
Materials Needed:
Before you begin, gather the following materials:
– Replacement cabin air filter (check your vehicle’s manual or online for the correct filter model)
– Ratchet and socket set
– Screwdriver
– Wrench
Step 1: Locate the Cabin Air Filter
The first step in replacing the cabin air filter is to locate it. In a 2015 Ford Explorer, the filter is typically located behind the glove compartment. To access it, follow these steps:
1. Open the glove compartment and remove the contents.
2. Look for a plastic cover on the back of the glove compartment. Remove the cover by gently prying it off with a flathead screwdriver.
3. Behind the cover, you will see the cabin air filter housing. It is usually held in place by two screws.
Step 2: Remove the Cabin Air Filter Housing
Once you have located the cabin air filter housing, follow these steps to remove it:
1. Use a ratchet and socket to remove the two screws holding the housing in place.
2. Carefully pull the housing away from the vehicle, being cautious not to damage any surrounding components.
Step 3: Remove the Old Cabin Air Filter
With the housing removed, you can now access the old cabin air filter. Follow these steps to remove it:
1. Gently pull the old filter out of the housing. It may be slightly sticky or dusty, so use gloves if necessary.
2. Dispose of the old filter properly.
Step 4: Install the New Cabin Air Filter
Now it’s time to install the new cabin air filter. Follow these steps:
1. Take the new filter and insert it into the housing, ensuring that it is oriented correctly.
2. Place the housing back into the vehicle and secure it with the two screws you removed earlier.
Step 5: Reassemble the Glove Compartment
With the new cabin air filter installed, reassemble the glove compartment by following the steps in reverse order:
1. Replace the plastic cover on the back of the glove compartment.
2. Place the contents of the glove compartment back inside.
Congratulations! You have successfully replaced the cabin air filter in your 2015 Ford Explorer. Regularly replacing this filter will help ensure a clean and healthy environment for you and your passengers.
