How much oil does a 2023 Ford Explorer take? This is a common question among new and potential owners of the popular SUV. Understanding the recommended oil capacity is crucial for maintaining the vehicle’s performance and longevity. In this article, we will delve into the specifics of the 2023 Ford Explorer’s oil requirements, as well as provide some tips on how to ensure proper maintenance.
The 2023 Ford Explorer is designed to handle various terrains and driving conditions, making it an excellent choice for families and adventure seekers alike. To keep the engine running smoothly, it is essential to use the correct type and amount of oil. According to the manufacturer’s specifications, the 2023 Ford Explorer takes approximately 5.1 quarts (4.8 liters) of oil for a full synthetic oil change, and 5.3 quarts (5.0 liters) for a conventional oil change.
When it comes to choosing the right oil for your 2023 Ford Explorer, it is crucial to follow the guidelines provided in the owner’s manual. The recommended oil type for the 2023 Ford Explorer is either a full synthetic or a conventional motor oil with a viscosity of 5W-20, 5W-30, or 5W-40. It is essential to use the correct viscosity, as this will ensure optimal engine performance and fuel efficiency.
To change the oil in your 2023 Ford Explorer, you will need the following tools and materials:
1. New oil filter
2. Appropriate amount of oil (5.1 quarts for full synthetic, 5.3 quarts for conventional)
3. Oil drain pan
4. Socket set and wrench
5. New oil filter wrench (if necessary)
6. Funnel
7. Safety gloves and eye protection
Before starting the oil change process, it is important to ensure that the vehicle is on a level surface and the engine is cold. This will help prevent burns and make the job easier. Here’s a step-by-step guide on how to change the oil in your 2023 Ford Explorer:
1. Park the vehicle on a level surface and engage the parking brake.
2. Open the hood and locate the oil drain plug and oil filter.
3. Place the oil drain pan under the drain plug and remove it, allowing the oil to drain completely.
4. Once the oil has drained, replace the drain plug and tighten it securely.
5. Locate the oil filter and remove it using the oil filter wrench (if necessary).
6. Clean the oil filter mounting area and apply a small amount of oil to the new filter’s rubber gasket.
7. Install the new oil filter and tighten it to the manufacturer’s specifications.
8. Using a funnel, pour the appropriate amount of oil into the engine oil fill tube, ensuring that the oil level reaches the “Full” mark on the dipstick.
9. Replace the oil fill cap and securely close the hood.
10. Start the engine and let it idle for a few minutes to allow the oil to circulate through the engine.
11. Check the oil level again and top off if necessary.
12. Dispose of the old oil and filter properly.
By following these steps and maintaining the correct oil level and type in your 2023 Ford Explorer, you can ensure that your vehicle performs at its best and remains reliable for years to come. Remember, regular oil changes are a key component of proper vehicle maintenance.
